Uponor radiant mat for commercial radiant applications Uponor’s Radiant Rollout Mat provides faster, more consistent installs for energy-efficient radiant heating and cooling applications.The mats consist of a custom-designed, prefabricated, prepressurized network of crosslinked polyethylene (PEX-a) tubing connected with ProPEX engineered polymer fittings — which are safe for burial in the slab. The mats reduce the number of required manifolds by up to 80%, while reducing rebar tying by 30% and saving up to 85% in installation time. Visit www.uponorpro.com for more information. Uponor MrPEX DuoTrack low-mass heat transfer plate MrPEX introduces a new style of extruded aluminum heat transfer plate for 3/8” and 1/2” PEX tubing in the same plate.DuoTrack is 48” long by 3 3/4” wide with prepunched holes featuring a double grove for two sizes of PEX tubing. This reduces inventory, space and cost. DuoTrack plates are low mass and have a faster response time, higher output and a lower water temperature requirement as compared to joist heating without plates. For more information, visit www.mrpexsystems.com. MrPEX Systems Tempra Plus and DHC-E tankless electric water heaters Stiebel Eltron offers the finest tankless electric water heaters available. Its Tempra® Plus whole-house and DHC-E point-of-use units outperform bulky hot water tanks and reduce hot water pipe runs. Designed and manufactured in Germany to North American standards, the rugged Tempra and DHC-E series contain all copper piping and heating elements and ensure many years of reliable service. There is a three-year warranty on all Stiebel tankless water heaters. For more information, call 800/582-8423 or visit www.stiebel-eltron-usa.com. Simply the best! Stiebel Eltron Long life for ComfortPro stainless, plastic manifolds Whether you prefer durable stainless steel or corrosion-resistant, high-tech polymers, ComfortPro ProMix Stainless and ProMix Poly manifold systems (pictured) are engineered for the same life of the building duty as the AquaHeat PEX systems attached to them. Each series offers supply and return ball valves with temperature gauges, integrated purge and bleed valves, and individual balancing valves with flow indicators accommodating one to 12 loops per manifold. Visit www.comfortprosystems. com for more information. ComfortPro Systems Pre-engineered boiler panels from HeatLink HeatLink’s new line of pre-engineered boiler panels are designed for use with Weil-McLain and Viessmann high-efficiency wall-mounted boilers. HeatLink’s panel is a prefabricated hydronic distribution system that works with condensing boilers to streamline installation time and reduce costs. The panels provide multizone capability, are available with convenient mounting and piping options to suit boiler room layouts, and require minimal space. The boiler and panel combination provides a durable and streamlined radiant heating solution. Visit www.heatlink.com for more information. HeatLink Radiant & Hydronics eNews, website The Radiant & Hydronics eNews is a twice-monthly enewsletter full of the latest happenings in the world of radiant and hydronic heating professionals. Each edition features industry news, the latest products, radiant tips, and training and networking events. All editions are archived at the Radiant and Hydronics website (www.radiantandhydronics.com). The website has additional news, products and information for “wet side” heating pros.
Published by SupplyHouseTimes. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Information+Showcase/1750857/215745/article.html.