KEYENCE IM-SERIES INSTANT MEASUREMENT SYSTEM With Keyence’s IM-Series Instant Measurement system, just place a part on the stage and press the button to complete 99 dimensional measurements, automatic data recording, and inspection report generation in 3 seconds. Now, with the contact height measurement unit, measurements are possible in the X, Y and Z directions. KEYENCE CORPORATION OF AMERICA (888) 539-3623 WWW.INSTANTMEASUREMENT.COM BOOTH 1827 NIKON INSIGHT L100 CMM LASER SCANNER The ultimate CMM laser scanner, the brand new InSight L100 CMM laser scanner offers the best possible combination of speed, accuracy and ease-of-use. Suited for both surface and feature measurement, the InSight L100 quickly delivers accurate data and insightful part-to-CAD comparison reports. NIKON METROLOGY (810) 494-5616 WWW.NIKONMETROLOGY.COM BOOTH 1605 CREAFORM 3-D OPTICAL MEASUREMENT TECHNOLOGY Creaform’s comprehensive range of portable and automated 3-D optical measurement technologies is specifically dedicated to dimensional inspection for quality control in production environments. Stop by booth 527 at the Quality Show to learn more about our 3D scanners, portable CMMs, photogrammetry and fully integrated dimensional inspection software. CREAFORM (855) 939-4446 WWW.CREAFORM3D.COM BOOTH 527 SHIMPO FGS-VC MOTORIZED FORCE TEST STANDS The FGS-VCs are designed for tension and compression applications. Various operation modes are selectable plus dwell time, acceleration or user-defined tests. Included software provides data collection, graphing of force versus distance and statistical analysis. A comparator mode allows quick decision pass /fail determination, ideal for production line testing. SHIMPO INSTRUMENTS INFO@SHIMPOINST.COM WWW.SHIMPOINST.COM BOOTH 611 TRACKVIA AUTOMATED DATA COLLECTION TrackVia is the leading collaborative, mobile quality management solution for manufacturers. TrackVia automates data collection from the factory floor, and provides the instant end-to-end visibility no spreadsheet can. Easily configure to your exact needs and integrate with any existing system, including ERP. TRACKVIA 800-673-3302 WWW.TRACKVIA.COM BOOTH 1932 GAGE-LINE TECHNOLOGY STANDARD A new “non-linear error compensation standard” for vision systems. For calibrating and maintaining the accuracy of vision systems. A cross mark and dot array grid etched in chrome on a 14 in. Sq. optical glass. Image area 12 in. Sq. (304.8mm sq.) with 0.50 in. And 12.7 mm increments. Accredited ISO/IEC 17025:2005 Lab Calibration. NIST traceable. GAGE-LINE TECHNOLOGY, INC. (585) 458-2000 SALES@GAGE-LINE.COM WWW.GAGE-LINE.COM BOOTH 533 LECO AMH AUTOMATIC HARDNESS TESTER Visit LECO Corporation at booth 615 and learn more about our AMH Series of Automatic Hardness Testing systems, which easily measure the impressions of various surface conditions. The AMH brings precision, accuracy, and efficiency to the forefront, supporting microindentation and Macro/Vickers hardness testing in fully automatic and semi-automatic configurations. LECO CORPORATION BOOTH 615 ASQ TRAINING ASQ Learning Institute™ Plan-Do-Study-Act (PDSA) Plus Qtools™ Training is a self-paced, suite of e-learning courses designed to teach everyone in your company the PDSA continuous improvement model, and related problem solving quality tools (QTools). It’s highly interactive and fully narrated from start to finish - providing knowledge, tools and templates for any workplace. ASQ (414) 272-8575 | WWW.ASQ.ORG | BOOTH 1906 DELCAM POWERINSPECT SOFTWARE The latest version of Delcam’s PowerINSPECT inspection software will be demonstrated on booth 1032 at the Quality Show. The 2015 R2 release of the hardware-independent metrology software makes it easier to complete fast and accurate inspection of complex assemblies. It includes more options for automation of inspection sequences, including automated probe changes, automatic feature extraction for point cloud batch inspection, and greater control over collision checking. DELCAM LTD 44 (0)121 683 1081 MARKETING@DELCAM.COM WWW.DELCAM.COM BOOTH 1032 MARPOSS IWAVE2 WIRELESS GAGE The new Marposs iWave2 wireless gage features a durable, ergonomic handle with rechargeable Li-ion battery that incorporates a computer with a 1.8” TFT color screen for displaying the measurement value in the operator’s hand. Interchangeable nosepieces rapidly convert the gage for ID, OD or length measurements. Measurement values can be transmitted to a gage computer located within a 10m distance. The iWave2 gage has a measuring resolution of 0.0001mm. The new iWave2 manual gage will be featured at the Quality Show 2015 in Booth 619. MARPOSS CORP. (888) 627-7677 MARPOSS@US.MARPOSS.COM WWW.MARPOSS.COM BOOTH 619 MICRORIDGE MOBILECOLLECT WIRELESS If you are considering wireless gaging, you are probably looking for a system that will work with the gages you have and those you will need in the future. You want the wireless technology to be interference free, easy to use, feature rich with proven reliability and durability. Let’s talk! MICRORIDGE (541) 593-1656 MARY@MICRORIDGE.COM WWW.MICRORIDGE.COM BOOTH 1028 HEIDENHAIN MSE 1000 MULTIPLEXOR Heidenhain’s MSE 1000 multiplexor brings revolutionary multi-channel electronics to metrology applications. The MSE’s ability to mix and match up to 250 devices, and the acquisition of measured values via Ethernet, make it especially useful in production line measurement systems. Ongoing integration with popular SPC programs, Q-DAS and Prolink Software ensure that collecting and processing data is easier than ever. HEIDENHAIN BOOTH 1320 QI MACROS FOR EXCEL QI Macros® simplifies statistics and Lean Six Sigma projects in every industry. We have been helping customers create awesome improvements in quality, cost, and profitability since 1996. Our easy-to-use toolkit includes charting and data analysis capabilities to jumpstart quality improvement efforts with real time results. QI MACROS FOR EXCEL (888) 468-1537 SUPPORT@QIMACROS.COM WWW.QIMACROS.COM/SPC-SOFTWARE-FOREXCEL BOOTH 1916 MINITAB STATISTICAL SOFTWARE Minitab® Statistical Software is the leading software used for quality improvement worldwide. Minitab 17 includes enhancements to the Assistant, a feature that guides you through your analysis step-bystep, as well as new data manipulation and exploration tools. MINITAB INC. (800) 448-3555 DTILGHMAN@MINITAB.COM WWW.MINITAB.COM BOOTH 1112 MICRO TOOLS INSPECTION GAGE Introducing the PG1000-400S-4K inspection gage with true 4K inspection capability; magnification to 400x and X-micron linear scales. 4K gives you visual resolution of at least 4 times more pixels than conventional 1080 pixel HD resolution. More pixels means higher accuracy inspections making this the ideal gage for inspecting micro tools. EURO-TECH CORPORATION (262) 781-6777 | WWW.PG1000.COM BOOTH 515 GAGETRAK CALIBRATION MANAGEMENT SOFTWARE With a solid 25-year track record, countless auditor recommendations and chosen by over 12,000 facilities worldwide, GAGEtrak is the #1 calibration management software solution in the world. Use GAGEtrak to manage metrology assets, monitor scheduled and unscheduled calibrations, minimize costs and maximize efficiency. Available in Desktop, Client/Server and Hosted versions. CYBERMETRICS CORPORATION (800) 777-7020 | WWW.CYBERMETRICS.COM BOOTH 1027 OXFORD INSTRUMENTS MAXXI 6 Oxford Instruments introduces the MAXXI 6 X-ray Fluorescence (XRF) analyzer for coating thickness and materials analysis. The MAXXI 6 uses a high-resolution SDD detector capable of measuring coatings down to the nanoscale and element composition at trace level. OXFORD INSTRUMENTS INDUSTRIAL@OXINST.COM WWW.OXFORD-INSTRUMENTS.COM BOOTH 1712 MAHR FEDERAL MARSHAFT SCOPE 250 PLUS Mahr Federal Introduces the MarShaft™ Scope 250 Plus, a flexible optical system for shop floor measurement of small rotationally symmetrical parts. Fast, accurate, fully automatic and competitively priced, the MarShaft™ Scope 250 Plus measures parts up to 40mm diameter by 250mm long. MAHR FEDERAL INC. 401-784-3100 | WWW.MAHR.COM BOOTH 1108 SCHNEIDER “NO-TOUCH-START” SOFTWARE Schneider Messtechnik presents the new SAPHIR QD software at booth 1720. Not only for individual parts, also for several identical parts (MMi) and several different parts (MMd). The user is not required to inform the control about the number of parts to be measured. The software will capture all parts. DR. HEINRICH SCHNEIDER MESSTECHNIK GMBH +49 671 291-228 U.KELLER@DR-SCHNEIDER.DE WWW.DR-SCHNEIDER.DE BOOTH 1720 CYCLOPS DIGITAL MICROSCOPE Unique, dual-mode scope has both HDMI and USB outputs, allowing operators to inspect without a CPU. Magnification up to 270x on a 21.5” HD monitor. Auto-focus operation available in USB Mode. AVEN, INC. WWW.AVENINC.COM | BOOTH 1608 POLYTEC TMS-500 TOPMAP The TMS-Topography Measurement Systems by Polytec enable highly accurate surface profiling in the controls laboratory and R&D areas for almost any workpiece surface. The award-winning TMS-500 TopMap astonishes with an excellent vertical resolution independent of the field-ofview, a large measurement area to avoid stitching, 70mm large vertical scan range and its telecenctric optics for high aspect ratio samples. POLYTEC, INC. (949)943-3040 P.CRAVENOR@POLYTEC.COM WWW.POLYTEC.COM BOOTH 512 JENOPTIK OPTICAL SHAFT MEASURING DEVICES Jenoptik industrial Metrology introduces a new generation of optical shaft measuring devices. Assuring absolute precision in the shortest possible measuring cycle times, the new single-camera solution permits the measurement of workpieces up to 80 mm in diameter without any loss of resolution. Accuracy with MPE values (maximum allowable error) of less than 2 µm are typical. JENOPTIK INDUSTRIAL METROLOGY (248) 853-5888 WWW.JENOPTIK.COM/INDUSTRIAL-METROLOGY BOOTH 1118 AICON STEREOSCAN NEO See what you measure! Scanning the surface of objects and display deviations from CAD in color directly on the component – this new technology stands behind the ‘neo’ in stereoSCAN neo. A new digital projector allows for this back projection. Furthermore, the stereoSCAN neo provides adaptive color projection. Sample projection during the measurement is ideally adjusted to the color of the surface in high-contrast. AICON AMERICAS INC. (734) 259-2382 AMERICAS@AICON3D.COM WWW.AICON3D.COM BOOTH 513 PROLINK FULL VIEW MONITOR Prolink is proud to show Full View, the revolutionary new factory monitor built into Enterprise Report Scheduler. Full View allows the user to quickly upload a factory map, place lights over critical areas, and specify data to be checked. Flashing lights alert management when trends occur for high level shop floor monitoring. PROLINK SOFTWARE CORPORATION (860) 659-592-8999 WWW.PROLINKSOFTWARE.COM | BOOTH 927 WINSLOW ENGINEERING 560S VIDEO TOOL ANALYZER The Winslow Engineering Model 560S Video Tool Analyzer is an inspection machine used for inspecting geometric features on cutting tools and parts. The Model 560S allows you to inspect large and small diameter tools down to .0015” diameter. We will display our “Motorized Zoom Lens Assembly” and new “Inspection Software.” WINSLOW ENGINEERING (920) 921-6404 | WWW.WINSLOWENG.COM BOOTH 1736 ORIGIN AUTOFIT SENSOR Introducing AUTOFit, Origin Technologies Corporation’s end-of-arm, robotic LaserGauge® sensor. Using Cross-Vector technology and flexible inspection routines for accurate, fast, cost effective gap/flush measurements on a moving assembly line. See a live demo at The Quality Show. ORIGIN TECHNOLOGIES CORPORATION INC. (256) 461-1313 | WWW.ORIGINTECH.COM BOOTH 1427 KORDT CORDISPHER The PCD of ball screw nuts can be measured with Cordispher. This hand tool is designed for the use in production. The five ball contact is simulating the assembled situation. Due to floating carriage pitch deviation will not affect the measurement. This device is introduced in production of ball screw steering. KORDT GMBH & CO. KG +49 2403 7005-10 MAIL@KORDT.DE | WWW.KORDT.DE BOOTH 1720 PQ SYSTEMS SQCPACK SOFTWARE SQCpack is quality control for anyone, anytime. SQCpack is the proven SPC solution that helps organizations utilize the power of data analysis to improve quality. Combining powerful SPC techniques with flexibility, SQCpack is an easy and scalable application that includes all the tools needed to comply with critical quality standards, reduce variability, and improve profitability. PQ SYSTEMS (800) 777-3020 | WWW.PQSYSTEMS.COM BOOTH 716 QT9 SOFTWARE QT9™ Quality Management Software eliminates all of the paper and Excel logs, making a quality management system paperless with electronic signature. QT9™ QMS is 21 CFR Part 11 compliant and built to automate any ISO 9001–, AS9100-, ISO 13485–, ISO 17025–,TS 19649–, and FDA-regulated quality systems. QT9 SOFTWARE WWW.QT9SOFTWARE.COM | BOOTH 707 DIATEST DIGITAL THREAD DEPTH GAGE The Diatest TD gage has a digital readout of .0005”/.010mm. The handles accept standard ANSI members that we stock for next day delivery. Easy use and wireless data transmission make this the perfect tool for shop floor or lab use when thread or bore depth (works with trilock cylindrical members also) is required. DIATEST WWW.DIATEST.COM | BOOTH 1400 PRECISION BALLS UNISTRAINT We have solved the age-old problem of how to create very long artifacts for the purpose of machine calibration. Now you can achieve accurate measurements of these long artifacts. Our Unistraint is a unique device (patents pending); the concept of the Unistraint is that it is not based on constraint or over-constraint, but on the simple principle that “if it doesn’t bend, it doesn’t matter.” We call this new doctrine: Unistraint. We offer a Ball Bar version and a laser tracker version, which you can see on our website and get the answers you need. PRECISION BALLS (323) 582-7348 | WWW.PRECISIONBALLS.COM BOOTH 528 HEIDENHAIN QC 3000 Heidenhain’s next generation QUADRACHEK 3000 is designed for measuring 2-D geometrical features quickly and easily. Common applications include measuring microscopes, video measuring machines, and measuring and profile projectors. The QUADRA-CHEK 3000 will make its debut at the Quality Show (Booth #1320) and will be available at the start of 2016. HEIDENHAIN BOOTH 1320 ORION CERTIFICATION AND AUDITING Orion provides certification with thorough and fair auditing, cost-effective pricing, and excellent customer service. We provide certification for: ISO 9001, AS 9100, 9110, 9120, ISO 13485, ISO 14001, OHSAS, R2, RIOS, e-Stewards, TL 9000, SFI CoC, BIFMAe3, & VCAP (coming soon, ISO 22301, 20000, & 27001). ORION (303) 645-4017 WWW.ORION4VALUE.COM BOOTH 1918 JG&A METROLOGY CENTER JG&A Metrology Center now utilizes NIST traceable calibration features on all CT systems to further validate system accuracy for repeatability and consistency. Reporting capabilities have been enhanced for PPAP & AS9102, with end user in mind. JG&A Metrology Center specializes in providing 3-D internal part inspection services using Industrial Computed Tomography equipment. JG&A METROLOGY CENTER (519) 962-5300 | WWW.JGARANTMC.COM BOOTH 634
Published by QualityMagazine. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Product+Spotlight/2276356/273926/article.html.