HIGH SPEED VIDEO CAMERAS The i-Speed LT, i-Speed TR, and i-Speed FS high-speed video cameras offer operators a choice to select from a variety of models based on applications, features and cost. The optional controller display unit (CDU) gives the operator full control and live display of all of the features of each of the cameras in the range, replacing the traditional need for a PC. The i-Speed FS camera is primarily designed for use in the ballistics testing market. The i-Speed TR is developed for users whose primary concern is to capture high quality, high speed images for review and analysis at a later stage. The i-Speed LT is a point-and-shoot high-speed video camera for manufacturing and engineering applications in the production and processing industries. OLYMPUS NDT • (781) 419-3562 • WWW.OLYMPUS-IMS.COM • REPLY 600 INSPECTION SCOPE The Inspection Scope is ideal for remote inspection of areas inaccessible to the naked eye. Applications include viewing critical but hard-to-see areas during machining operations, inspection of internal parts of engines and machinery, A/C systems and interior structures of walls. It has an auto-focus digital video camera with three light intensity settings. The unit offers a full color image sensor and dual solid state LEDs. A 2.5-inch (63.5 mm) full-color LCD displays live video from the digital camera and offers resolution of 320 x 240 pixels. STARRETT CO., THE L.S. (978) 249-3551 WWW.STARRETT.COM REPLY 601 MEASUREMENT IN FLIGHT ScopeCheck and VideoCheck coordinate measuring machines can take measurements while in constant motion. By flashing the light sources, blurriness due to the motion is eliminated. Start-stop operation is no longer needed. Measurement time is reduced and the efficiency of the measuring machine is increased. WERTH INC. (860) 399-2445 WWW.WERTHINC.COM REPLY 602 MEASUREMENT CENTER The MIC TRAC is available in two models—the MT-3000 and the MT-4000. The MT-3000 model is the choice for part measurement and hand-tool calibration. The MT-4000 model offers a higher precision to calibrate cylindrical and threaded ring and plug gages. An optical glass scale housed within the base unit provides accuracies to +0.00002 inch (0. 5 ìm). Also, receiver pads and anvils are manufactured and precision ground to within 0.00005 inch (1.3 ìm) to provide parallel surfaces for measuring. Both models are available in measurement ranges of 0-12 inches, 0-24 inches, 0-36 inches, 0-48 inches and larger custom sizes. GAGEMAKER LP• (713) 472-7360 • WWW.GAGEMAKER.COM • REPLY 603 ROBOSCAN 600 The RoboScan 600 automatically scans the part surfaces for defects. The system is preprogrammed to test certain part types. Measuring different types of parts is made possible by different sensors, robot programs and ViewScan measurement templates. Testing new part types can be taught to the system. AMERICAN STRESS TECHNOLOGIES INC. (724) 410-1030 WWW.ASTRESSTECH.COM REPLY 604 NAVIGATOR TECHNOLOGY The Contura G2 navigator technology is available with measuring ranges of X=700, Y=700 and Z=600 millimeters and X=700, Y=1,000 and Z=600 millimeters. The technological features include the sensitive Vast XT gold active probe, CAD-based Calypso measuring software in conjunction with the Vast navigator option and an intelligent scanning engine for a control unit. CARL ZEISS INC. (763) 744-2409 WWW.ZEISS.COM/ REPLY 605 TOUCH SCREEN JOGBOX Incorporating a modern touch screen interface with an ergonomic design and soft-touch materials, the Universal Job Box is designed to be tough and withstand the rigors of industrial use. It combines traditional mechanical hard buttons, dials and a joystick along with an industrial color touch screen forcontextual input and output. HEXAGON METROLOGY (800) 343-7933 WWW.HEXAGONMETROLOGY.US REPLY 606 MULTIPOINT READOUTS The ND 2100G series Gage-Chek handles machine measurement and inspection tasks, from simple pass/fail detection up to complex SPC evaluation. They can be configured for basic or advanced operations where inputs can be assigned and combined as desired, along with mathematical, trigonometric or statistical formulas. Rapid acquisition of measurement data can monitor dynamic events such as the eccentricity of a rotating shaft. HEIDENHAIN CORP. (847) 519-3392 WWW.HEIDENHAIN.COM/ REPLY 607
Published by QualityMagazine. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Products/333172/32870/article.html.