<b>INDUSTRIAL VIDEOSCOPES</b> The IPLEX LX and IPLEX LT are 10-meter-long industrial videoscopes that perform visual testing of heat exchangers, boiler tubes, tanks and pumps in power plants and petrochemical facilities. Their interchangeable optical adaptors magnify and direct while the LED lights illuminate surrounding areas. The IPLEX LX and LT weigh 9 pounds and have a 6.5-inch LCD with low ambient reflection. They meet IP55 standards and United States Defense Standards MIL-STD-810G, Method 510.4/506 for resistance to dust and rain, and with MIL-STD-810G, Method 516.5 for the 1.2- meter drop test. The IPLEX LX has wide dynamic extended range image processing capability to show detail in shadowed and highlighted areas. It also has interchangeable optical tip adapters. The IPLEX LX has high-resolution image capture with two parallax lenses. <b>OLYMPUS • (781) 419-3562 • WWW.OLYMPUS-IMS.COM • REPLY INSPECTION SYSTEM</b> The TalyMaster Inspection System uses roughness, roundness and contour for multi-part measurement and can inspect more than 50 parts without operator intervention. Multiple part types can be loaded onto a pallet, and drop down menus allow the operator to choose the required measurement operation, number of parts and their individual locations on the pallet. The TalyMaster performs three measurement functions utilizing five axes of motion. For contour, it measures radius, angle and distance. It measures roughness in a linear or circumferential direction. Its precision air bearing and high-accuracy column control roundness, cylindricity and parallelism tolerances. <b>TAYLOR HOBSON (630) 621-3099 WWW.TAYLORHOBSON.COM REPLY 601 COLOR SPECTROPHOTOMETER</b> The Model 600 noncontact imaging spectrophotometer makes a noncontact measurement of color over a large area, measuring reflective, transmissive and emissive color from 380 to 780 nanometers. It measures graphics of packaging, prints, fine art, textiles, flooring, wall treatments, illuminated displays, backlit panels, projection systems, overlays, foods, pharmaceuticals, powders, liquids, plastics, paints, coatings, inks and medical imagery. With the aid of compatible software, it compares identical sample patterns to a standard image in seconds. Its camera sensor acquires spectral data over the measurement area. It allows users to place an adjustable cursor on the area to be measured. <b>TRICOR SYSTEMS INC. (847) 742-5542 EXT.140 • WWW.TRICOR-SYSTEMS.COM • REPLY 602 TOUCH PROBE</b> The TT 449 tool touch probe is a wireless infrared tool probe designed for numerically controlled machine tools. It works with tilting or rotating work, rotary tables or with 5-axis machining centers. The disk-shaped contact of the TT is deflected and the signals are transmitted to the control over an infrared light beam. The generated trigger signal is then transmitted via an SE 642 transmitter/receiver unit to the control, where it is further processed. The SE 642 can also be used for a spindle probe. The control then ultimately saves the measured tool length and radius in the tool memory. The TT 449 tool touch probe has IP 67 protection and its lithium battery provides up to 200 hours of power. <b>HEIDENHAIN CORP. (847) 490-1191 • WWW.HEIDENHAIN.COM • REPLY 603 DATA COLLECTOR</b> The Model 600 is a handheld data collector made for torque applications. It measures residual torque as qualified by actual fastener rotation. It uses rotary transducers to measure power tool performance; hand assembly setting to torque or torque plus angle; and the generation of torque/time/angle plots to document joint performance. The Web-based collector has realtime audit status and completion summaries; automatic data harvesting; automatic spec limit and configuration updates. It enables download variables data collection setups and the uploading of collected data to an Excel spreadsheet, tab delimited or comma delimited file. <b>ASI DATAMYTE INC. (763) 746-4172 WWW.ASIDATAMYTE.COM REPLY 604 POWDER CHECKER</b> The PosiTector PC Powder Checker measures uncured powder coatings using ultrasonic technology to calculate and display a predicted cured thickness, including small tubes, odd shapes and moving parts. The Checker has an internal memory of up to 1,000 readings and does not require software. The gage displays basic statistics and automatically generates formatted reports with measurement summaries and charts. <b>DEFELSKO CORP. (315) 393-4450 WWW.DEFELSKO.COM REPLY 605 LINE SCAN CAMERA</b> The XD8800 series line scan camera has dual energy X-ray imaging technology and comes in 25 to 100 kiloelectronvolts or 45 to 160 kiloelectronvolts. It has eight active detector lengths ranging from 307 millimeters to 1,229 millimeters. Its resolution ranges from 192 by 2 to 768 by 2 with pixels on 1.6 millimeter centers; 384 by 2 to 1,536 by 2 with pixels on 0.8 millimeter centers; and 768 by 2 to 3,072 by 2 with pixels on 0.4 millimeter centers. It has CMOS silicon imaging detector array chips, with on-chip signal processing circuits, 16-bit ADCs, digital control and Camera Link interface to a user’s remote PC-based frame-grabber and data acquisition system. Its analog-to-digital converters are close to the detector chips and it uses a low-voltagedifferential- signal technology. Inspection speeds go up to 18,000 lines per second. <b>X-SCAN IMAGING CORP. (408) 432-9889 WWW.X-SCANIMAGING.COM REPLY 606 TEMPERATURE CALIBRATOR</b> The RTC-700 is a temperature calibrator with a range of 33 to +700 C (91 to 1292 F) and it provides temperature calibration of sensors through triple-zone heating technology. Each of the RTC-700’s heating zones is independently controlled. The lower and middle zones dissipate heat throughout the calibration zone. The upper zone compensates for heat loss from the sensor-under test as well as from the open top to calibrate liquid-filled and other sensors. Its dynamic load compensation sensor measures the temperature in the calibrator’s insert and provides feedback to the active triple-zone system to compensate for the temperature differences resulting from testing various sensors. The RTC-700 has plug-and-play connectivity, a VGA display and a USB connection. It includes a reference sensor angled at 90 degrees to calibrate threaded sensors and sensors with connection heads. <b>AMETEK CALIBRATION INSTRUMENTS (727) 536-7831 WWW.AMETEKCALIBRATION.COM REPLY 607 LASER INSPECTION</b> The Accura coordinate measuring machine uses foam insulating technology for temperature resistance; a selectable temperature range from 20 to 26 C; and is made with steel and aluminum components with Coated Ageing Resistant Aluminum Technology. The Accura’s maximum vectorial travel speed is 800 millimeters per second. Laser scanners monitor the protection zone around the measuring machine during the highspeed mode. If the safety system registers movement within this zone, the machine speed is automatically lowered within one second. Once the disruption passes, the system reaccelerates to the original measuring speed. The thin air gap results in rigid air bearings and require less compressed air than previous air bearings. <b>CARL ZEISS INDUSTRIAL METROLOGY +49 7364 20-2144 WWW.ZEISS.DE REPLY 608 MODULAR FIXTURING</b> Modular fixturing is available for coordinate measuring machines (CMMs) and machine vision systems. Modular fixturing uses components that can be reused and rearranged. Regardless of size, shape or material, the fixturing can hold virtually any part. Many different parts can be set up on the fixture at one time, saving operator time and fixturing expense. To maintain consistency with future setups, operators can document the setup with the company’s software. <b>SMARTCAMCNC (408) 224-4024 WWW.SMARTCAMCNC.COM REPLY 609 SHAFT ENCODERS</b> Hollow-Shaft encoders are designed for direct mounting onto shafts up to 740 millimeters in diameter. They provide 17-bit absolute single-turn resolution and measure 27 millimeters wide. The magnetic hollow-shaft encoders have FPGA signal processing and integrated offset, amplitude and phase control and generate maximum incremental square pulses of 524,288 periods per revolution and a maximum sine/cosine interpolation of 32,768 periods per revolution. They consist of IP 68 stainless steel encoder wheels that mount on the drive shafts, and IP67- rated sensing heads. The magnetic scale on the outside of the encoder wheel is sensed tangentially. The encoders are designed with no moving parts, light source or fragile components and are designated for use in aerospace, energy generation, heavy equipment, marine applications and oil and gas processing. <b>BAUMER HDMAG ENCODERS (800) 937-9336 WWW.BAUMER.COM/USA REPLY 610 VERTICAL MEASURING MACHINES</b> The Endeavor 3 CMM is a line of vertical coordinate measuring machines. The Endeavor 3 is suitable for touch trigger applications and the Endeavor 3 Plus is meant for more demanding tactile and no-contact scanning applications. The Endeavor 3 Plus has sensor support, including the Leitz LSP-X1 and LSP-X3 tactile scanning probes. It supports the CMM-V and CMM-Ve vision sensors, and the ScanShark noncontact laser scanning sensor. <b>SHEFFIELD MEASUREMENT (800) 535-1236 WWW.SHEFFIELDMEASUREMENT.COM REPLY 611 DEFECT ANALYSIS SOFTWARE</b> PC-DMIS Planner software creates a two-directional data flow between a computer-aided design (CAD) model and its related inspection part programs. PC-DMIS Planner automates communication links such as design modifications so CAD file revisions can be electronically communicated to quality control. Users can identify and embed information in a planning file that is associated with the product’s CAD file. It interfaces directly to the CAD model in the original CAD database. Change Management tools within PC-DMIS Planner allow the user to identify changes to an original part model or inspection plan. <b>WILCOX ASSOCIATES INC. (401) 886 2770 WWW.PC-DMIS.COM REPLY 612 INDUSTRIAL TRANSMITTER</b> HF8 humidity and temperature transmitters use AirChip3000 technology to communicate with HygroClip2 probes. Its measurement accuracy is 0.8% RH and 0.1 C. It can measure humidity ranges from 0 to 100% RH and temperature ranges of -100 to 200 C. The AirChip3000 technology has an automatic sensor test and drift compensation. The probes are temperature compensated with more than 30,000 data points. The HF8 has two probe inputs and optional HW4 software, which allows users to configure the connected HygroClip2 or third party analog probes. Each HF8 has four analog outputs and four alarm relays. These are programmable to probe input and probe parameter, including psychrometric calculations such as dew point or wet-bulb. Audible and visual alarms can be activated. The data logging function allows recording of up to 20,000 data points with a date and time stamp. Users can configure the logging intervals and download, store and graph the data with the HW4 software. Ethernet digital outputs are available. <b>ROTRONIC INSTRUMENTS CORP. (631) 427-3898 WWW.ROTRONIC-USA.COM REPLY 613 DIGITAL MICROSCOPES</b> The Leica DVM5000, DVM3000 and DVM2000 are digital microscopes that display images on a high-resolution monitor. The zoom optics inspect large stationary parts and employ 2-D analysis and 3-D surface measurements. The DVM5000 includes optics, a monitor and computer, and can convert into a compact, portable system. The DVM3000 includes zoom optics with encoded magnifications, a digital camera, integrated metal halide lamp and standard interfaces. The DVM2000 has standard zoom optics, a digital camera and software. All digital microscopes have a 2.11-megapixel digital camera and highresolution optical zoom. The cameras generate digital images without enlarging their data volume and file size, and have 16-bit individual color detection. <b>LEICA MICROSYSTEMS (800) 248-0123 WWW.LEICA-MICROSYSTEMS.COM REPLY 614 PSS CONTOUR SYSTEM</b> The ContourGT-X8 PSS combines noncontact 3-D measurement with PSS metrology hardware and software technology. It has dual HB-LED illumination and continuous calibration, so the system can be integrated with automated wafer handlers to provide PSS measurement, throughput and gage repeatability and reproducibility. <b>VEECO INSTRUMENTS INC. (520) 741-1044 WWW.VEECO.COM REPLY 615 AUTOMATED HARDNESS TESTER BROCHURE</b> The new four-page brochure for the AMH43 automated hardness testing system includes color examples of the system’s patented visual PANOPTIC method, which automatically traces the sample edge of a live image, enabling the positioning of indents and patterns directly onto the overview image of a part. Other features highlighted include the color hardness/contour map and the new advanced image placement module. The system measures impressions of various surface conditions and supports both microindentation and MacroVickers hardness testing. <b>LECO CORP. (800) 292-6141 WWW.LECO.COM REPLY 616 CUSTOMIZABLE EXCEL CHARTS</b> Customizable reports from Microsoft Excel templates allow the user to reference one of configurations or data items from Total Vu, such as product specifications, statistical values, Total Vu charts and measurement values. Multiple rows and columns can be filled by pre-defined and formatted Excel charts. When a report is triggered, Total Vu creates a new workbook from the template, fills in cells that reference Total Vu items with the corresponding value and then saves and/or prints the new workbook. <b>LASERLINC (937) 318-2440 WWW.LASERLINC.COM REPLY 617 3-D MEASURING ARMS</b> The Absolute Arm is a portable measuring arm with absolute encoders. It has Wi-Fi capability and rechargeable batteries. The arm has two levels of precision and seven arm-lengths between 1. 5 and 4.5 meters. <b>ROMER, A HEXAGON METROLOGY CO. (401) 886-2770 WWW.ROMER.COM REPLY 618 AUDIT PACKAGE</b> TrackWise Audit Execution Package allows users to access general audit information, templates/plans and the ability to author related observations offline. It generates draft reports in real time without online connectivity, allows auditing programs to be distributed to third parties, and is powered by Adobe-Flex-based technology. The user can implement dashboards, reporting and automated business rules and escalation paths in conjunction with all aspects of the audit management lifecycle. <b>SPARTA SYSTEMS (732) 203-0400 WWW.SPARTASYSTEMS.COM REPLY 619 CAMERA-BASED MEASURING SYSTEM</b> The SOLOspin is a camera-based measuring system with a 360 degree field-of-view. It uses Metronor’s handheld probe in combination with a camera that can be rotated. As the camera moves, the system’s reference also is rotated automatically, SOLOspin capability can be added to existing Metronor SOLO and DUO systems or SOLOspin can be purchased as a turnkey system. <b>METRONOR (206) 344-3800 WWW.METRONOR.COM REPLY 620 MEASUREMENT CENTERS</b> The Excel 501 and 502 are precision multisensor measurement system for aerospace, precision machined parts, precision plastics, electronics, LCD, solar and multiple part applications. With a 500 x 400 millimeter stage area the system is comparable in size to standard CMMs. Laser, touch and vision sensors can be used on the same part. The stage accommodates parts that cannot be measured with multiple sensors on small bench model systems. The systems include programmable multisegment lighting, lights calibration, 6X or 12X optical magnification, 3X digital magnification, nonlinear calibration of the stage and nonlinear calibration of the optics <b>MICRO-VU CORP. (707) 838-6272 WWW.MICROVU.COM REPLY 621 TAILORED APPLICATION SOLUTIONS</b> Bluehill 3 Testing Software provides a wide range of tailored application solutions to meet the demands of many users from educators and test technicians to quality engineers and laboratory managers. This newest version is compatible with all Instron 5500 and 5900 Series Testing Systems. The software offers users the option to configure a test method that can be launched directly from the desktop and to start running tests without ever interacting with a keyboard or mouse. <b>INSTRON (800) 564-8378 PR.INSTRON.COM REPLY 622 SURFACE TEXTURE ANALYSIS</b> The MountainsMap 6 standard solution includes dedicated software for tactile and optical scanning profilers, confocal laser scanning microscopes, white light interferometers, scanning probe microscopes, optical microscopes, form and contour measurement systems, scattered light measurement instruments, imaging systems and workshop roughness meters. With native 64-bit code and optimal exploitation of multi-core technology, the new software provides surface analysis power. It both accelerates calculations and provides excellent performance with large measurement data sets and advanced applications that require heavy processing. <b>DIGITAL SURF +33 3 81 50 48 00 WWW.DIGITALSURF.COM REPLY 623 VIDEO TOOL ANALYZER</b> The Model 565 video tool analyzer permits rapid, precise inspection of cutting tool and part geometric features for new tool/ part inspection as well as tool regrind. Tool and part geometries are displayed directly on the 565 computer monitor for analysis. The base unit of the 565 Video Tool Analyzer contains the base assembly, computer, inspection software, lens/digital camera assembly, fiber optic light source/ring light, X–Y electronic scales and rotary B axis encoder kit. The base section of the 565 can be split apart allowing the operator to take the section of the analyzer containing the camera and slides to a machine or granite plate for tool or part inspection. The advantage of this feature is that the operator will not have to remove the part from the granite plate or machine for inspection. <b>WINSLOW ENGINEERING (920) 921-6404 WWW.WINSLOWENG.COM REPLY 624 MULTISENSOR TECHNOLOGY</b> The measuring range of the ScopeCheck MB series is up to 800 millimeters in the X-axis and 2,000 millimeters in the Y-axis. 3-D workpieces with high point density can be scanned quickly with the new laser line probe. Measurement of functional dimensions with tactile, image processing technology or laser sensors is possible by integrating the company’s multisensor concept. Free form surfaces are quickly and completely measured with the laser line probe sensor in the same coordinate system. <b>WERTH INC.(860) 399-2445 WWW.WERTHINC.COM REPLY 625</b>
Published by QualityMagazine. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Quality+Products/483376/45582/article.html.