DIFFERENTIAL PRESSURE SENSOR The SDP2108-R measures air flow in medical ventilation applications. The differential pressure sensor has a measuring range of 0 to 3500 pascal. It has similar mechanical, electrical and physical characteristics to the SDP1108-R, which covers a smaller measuring range of 0 to 500 pascal. It is fully calibrated and temperature compensated. It has a response time of 8 milliseconds and provides an analog output signal with a range of 0-4 volts. SENSIRION INC. (805) 409-4900 WWW.SENSIRION.COM DIGITAL AMBIENT-LIGHT SENSOR The MAX9635 has two photodiodes and an adaptive gain block that automatically selects optimum gain range. It measures 2 by 2 millimeters. The unit has a 4-million-to-1 dynamic range for lux readings in all ambient-light conditions. It has a 0.65 micrampere operating current, consumes 1.1 microwatts and operates from a 1.7 to 3.6 volt supply. It measures light levels from 0.045 to 188,000 lux. MAXIM INTEGRATED PRODUCTS (408) 737-7600 WWW.MAXIM-IC.COM XRF ANALYZERS Handheld Thermo Scientific Niton XRF analyzers are engineered for portable elemental analysis. They are designed for any location and field environment or weather condition. The units have analytical ranges from magnesium through the transuranic elements and have detection limits and shorter measurement times than previous models. THERMO SCIENTIFIC (800) 875-1578 WWW.NITON.COM CLOUD COMPUTING SOFTWARE The Synergy 3000 statistical process control (SPC) system is designed to gather, organize, analyze and report on the data sets required for real-time quality management. It can input measurements or inspection counts, monitor process status, troubleshoot processes, track and trace production samples and exchange quality assurance data with customers and supply chain partners. ZONTEC (866) 955-0088 WWW.ZONTEC-SPC.COM MINIATURE INFRARED SENSOR The thermoMETER Cslaser is a miniature infrared sensor with an integrated controller. The unit has a two-beam laser aiming feature, which marks the actual spot size at any distance. The controller is already integrated into the sensor. The sensor can be optimized for specific measurement tasks by using different lenses. Objects of 0.5 millimeter can be measured at a distance of 150 millimeters from the sensor. MICRO-EPSILON UK LTD. (919) 787-9707 WWW.MICRO-EPSILON.CO.UK MOUNTING BRACKETS Designed for use with series 28 and 29 photoelectric sensors, OMH-RL29-06 mounting brackets have alignment and positioning flexibility and a protective shroud that covers two sides of the sensor housing. The bracket is fastened on a 0.5 inch diameter rod or bolt and has half-clamp mounting that can be rotated 360 degrees to align to the sensor. Applications include automotive, material handling and packaging industries. PEPPERL+FUCHS (330) 425-3555 WWW.PEPPERL-FUCHS.US PROCESS FILTER GAGE The Series PFG2 process filter gage is designed for determining the state of an in-line filter. The differential pressure indicator determines the pressure drop on either side of a filter through its 0.08 inch female NPT pressure connections, and relates the value to one of three zones. It is designed for filter applications, line loss and valve drop differential pressure applications. DWYER INSTRUMENTS INC. (800) 872-9141 WWW.DWYER-INST.COM INJECTION MOLD TESTING MATERIAL Mold-Align is a surface pressure indicating material that is designed to improve yields and reduces defects in the injection molding process by minimizing flash, shorts and burns, and to indicate mold face planarity. When placed between mold halves that are compressed together, the material changes color, revealing how pressure is being distributed between the mold faces. Uniform surface pressure across the parting line and platens is needed for the two mold halves to be aligned. SENSOR PRODUCTS INC. (800) 755-2201 WWW.SENSORPROD.COM DIFFERENTIAL PRESSURE GAGE The Model 220 has a two wire 4-20mA transmitter option using the same CSA, UL and ATEX rated sensor and explosionproof housing. The transmitter has an industrial type terminal strip and is housed in heavy-duty, cast aluminum housing. Wiring access is through a half-inch NPT port. Accuracy is ±2% from 20% to 100% of full scale. Indicator accuracy is ±2% and is independent of the transmitter. Weatherproof construction includes standard 4.5 inch dial and shatter-resistant lens. MID-WEST INSTRUMENT (800) 648-5778 WWW.MIDWESTINSTRUMENT.COM CARBIDE ENDMILL The XE solid carbide endmill is designed for aerospace machining and has a geometric design with deep flutes and high helix cutting edges. The design of the unit enables the tool to slot and profile to higher radial and axial engagements and run at higher surface speeds and feeds than previous models. It is designed for use in difficult-to-machine materials. STELLRAM (615) 641-4200 WWW.ATISTELLRAM.COM ETHERNET TESTER The 5850 is a handheld Gigabit Ethernet tester designed for the installation and maintenance of Ethernet networks. The tester performs network testing, data packet capture, traffic generation, line testing, bit error ration testing and RFC- 2544 benchmark testing. It also conducts connectivity tests, including Ping, Trace and ARP Scan. The tester identifies cable faults such as short circuit open circuits and determines cable length. The unit has a USB drive for data exchange. Test results are shown on an LCD screen in text or graphic format. GAO COMM INC. (877) 585-9555 WWW.GAOCOMM.COM DATA LOGGING SYSTEM The LogMessage is a data collection, control and alarming system. It comes in seven configurations with up to 30 analog inputs and a sampling rate up to 1,200 hertz. The system has universal, differential, galvanically isolated analog inputs. It is designed for remote equipment monitoring, product testing, quality and reliability testing, process monitoring, research and development, and fault analysis. CAS DATA LOGGERS (800) 956-4437 WWW.DATALOGGERINC.COM VIDEO BORESCOPES Voyager Video Borescopes are 0.22 inch or 0.44 inch diameter probes with flex-and-stay, semi-obedient design. The units inspect automobiles, pipes, walls, ductwork and difficult-to-access areas. Each probe has a complementary metal oxide semiconductor (CMOS) video camera chip in tip, which will capture 720 by 480 pixel JPEG images and AVI video recorded at 30 frames per second with a defined focal range of 0.8 to 11 inches. The unit’s portable monitor has an adjustable screen that stands up or lays flat against a handle. MEDIT INC. (800) 239-9934 MEDITINC.COM CNC HONING SYSTEM The SV-410 CNC honing system provides control for cylinder geometry, surface finish and crosshatch parameters for ring seal, uniform lubrication, minimal leak down and heightened horsepower. The system allows for in-line 4- and 6-cylinder engines. It has walk-in access doors and stainless steel enclosure preconfigured for use with automated part loading systems, while the CNC control includes an automation interface. SUNNEN PRODUCTS CO. (800) 325-3670 WWW.SUNNEN.COM NONCONTACT SENSING SYSTEM The KD-2306 is a noncontact. Linear displacement measuring instrument. It has resolution down to 10 nanometers and speeds to 50 kilohertz. It makes high-precision static and dynamic measurements, and supports ambient, moderate temperature, and cryogenicrated sensors. Applications range from lab work to production and process automation. The DIN rail mount packaging makes the system ideal for integration into OEM equipment and industrial control applications. KAMAN PRECISION PRODUCTS (719) 635-6957 WWW.KAMANSENSORS.COM CAVITY PROBE The V3FGA06H cavity probe is designed for use in the automotive industry. It fits through small openings in a car body to measure coating thickness. The probe head has three-point support of the probe tip and a variable back stop, which defines the distance from the entry hole to the measurement area. FISCHER TECHNOLOGY (860) 683-0781 WWW.FISCHER-TECHNOLOGY.COM
Published by QualityMagazine. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Quality+Products/631938/60389/article.html.