SURFACE METROLOGY SYSTEM The NPFLEX-LA Surface Metrology System quantifies true lead angle and surface roughness for the control and reduction of fluid leakage of rotary dynamic sealing systems. It defines critical surface parameters of machined shafts, which directly impacts seal integrity and prevents premature failures in the field to solve a critical precision machining industry problem. It is gage-capable and measures lead and surface texture, independent of part alignment. BRUKER CORP. (520) 741-1044 WWW.BRUKER-AXS.COM TOUCH-TRIGGER PROBE HEAD The PH20 probe head has high-speed point capture with minimal coordinate measuring machine (CMM) movement. It increases touch-trigger CMM inspection throughput up to three times and can be used on smaller CMMs. The PH20 is available for new CMMs, as well as retrofit machines using shank or quill mounting. It can use most existing inspection programs for indexing heads without modification and requires no compressed air. RENISHAW INC. (847) 286-9953 WWW.RENISHAW.COM/PROBES ROTARY SERIES ENCODERS Heidenhain low profile incremental rotary 1000 and 1100 series encoders have block commutation tracks designed for use in small-dimensioned servo motors. They have a 35-millimeter housing diameter. They have opto-ASIC based photoelectric scanning with integrated interpolation. They can be connected to almost all standard subsequent electronics for control of digitally controlled servo motors up to edge lengths of 40 millimeters and 55 millimeters, and are designed for various applications in the automation industry. HEIDENHAIN CORP. (847) 490-1191 WWW.HEIDENHAIN.COM OPTICAL COMPARATOR The 14HE optical comparator has a machined chart ring with a recessed screen to protect internal optics and align the screen to the optical axis. The highresolution angled glass screen measures 14 inches. It has a large-format vernier protractor with one minute graduation, coated telecentric par focal optics and a quick-change single lens mount. It can be used with overlays or a variety of readout formats. It has published optical and travel accuracy specifications and NISTtraceable certifications. DORSEY METROLOGY (845) 454-3111 WWW.DORSEYMETROLOGY.COM CYLINDRICITY MACHINE The MMQ 200 Formtester provides the measurement of surface finish parameters according to accepted ISO, ASME and JIS standards. With the combined hardware/ software MMQ 200 surface finish option, it has reduced set-up and measurement cycle time, and needs one piece of equipment for both form and surface measurements. It was designed with roughness measurements and can sample data with spacing down to 0.5 micron. MAHR FEDERAL INC. (401) 784-3275 WWW.MAHR.COM VERTICAL CNC HONING SYSTEM The SV-1005 series vertical CNC honing system has an integrated air gaging system that has closed-loop control of tool size, along with downloadable SPC data. It automatically controls hole size to accuracies of 0.25 ìm without operator intervention, working in a bore size range of 3 to 65 millimeters in diameter. It was designed for automated, highprocess capability production of small engines, hydraulic valves, fuel injectors, gears, compressor parts, turbocharger housings and gun barrels, in medium and high volumes. SUNNEN PRODUCTS CO. (314) 781-2100 WWW.SUNNEN.COM MODULAR ENCLOSURE The Hemco coordinate measuring machine (CMM) rooms are designed to maintain a ±1 degree temperature consistently. The modular room provides the environmental precision and accuracy necessary for companies that need to meet tight specification standards. These modular enclosures are built to exact specifications. Wall and ceiling panels are chemical resistant and non-porous. HEMCO CORP. (800) 779-4362 WWW.HEMCOCORP.COM AUTOMATED INSPECTION SOFTWARE The iNspect Express Version 1700 was designed for automated inspection and quality assurance for BOA smart cameras. The software interface allows operator set up and deploy solutions with no programming. The new version of BOA software introduces optimized algorithms, optical character recognition (OCR) and 2-D matrix readings, as well as improved calibration tools. It includes a PC-based application for displaying images and results from multiple BOA cameras on the same screen. Operators using this application can monitor production, change job files and review inspection history of any BOA connected to the local network. TELEDYNE DALSA (978) 670-2000 WWW.DALSA.COM FLOW MODELING SOFTWARE Version 5.1 of Fluent for CATIA V5 is a flow modeling technology within the V5 product lifecycle management (PLM) environment. This version has meshing, workflow and post-processing enhancements and aligns with the Ansys vision of simulation driven product development (SDPD). These enhancements allow more options in creating meshes than previous versions, allow faster solutions with smaller files and rapid post-processing of large cases. ANSYS (866) 267-9724 WWW.ANSYS.COM IN-SITU PROBE The Hygropin in-situ probe requires an 8 millimeter diameter hole at the test site. It can reach stable values within five minutes. It has two independent probe inputs to gather simultaneous readings from both an in-situ probe and ambient probe on two independent channels which can be fitted in any combination. It has data recording for 10,000 measurements and an onboard trend indicator. PROCEQ (724) 512-0330 WWW.PROCEQ.COM HIGH PASS FILTERS The CHPFL series of high pass filters was designed for test equipment and general lab use. It comprises five models, with frequency up to 1 gigahertz. It has out-of-band rejection and 50 ohm subminiature version (SMA) connectors. All filters in the CHPFL family are rated at +4 watts, with an operating temperature of -40 C to 85 C and storage temperature of -55 C to 100 C. MACROVISION INC. (215) 348-1010 WWW.MACROVIS.COM DATA MONITORING SYSTEM The LogMessage system has been designed to record data for applications such as remote monitoring, product testing, quality and reliability testing, process monitoring, research and development (R&D), and fault analysis. This system is available in seven different configurations that incorporate up to 30 analog inputs with a sampling rate up to 1,200 hertz. It can measure voltage, current, thermocouple or resistance temperature detectors (RTD) sensors. CAS DATALOGGERS (800) 956-4437 WWW.DATALOGGERINC.COM
Published by QualityMagazine. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Quality+Products/683170/65366/article.html.