Microspectrophotometer The 20/20 PV microspectrophotometer automatically measures spectra by absorbance, reflectance, fluorescence and emission from the deep ultraviolet to the near infrared of submicron-sized sample features. It was designed to be programmable with touch-screen controls so that it can automatically analyze microscopic samples with ultravioletvisible- near infrared (NIR) spectroscopy and microscopy. Applications include contamination analysis of hard disk components, thin film measurement of semiconductors, microcolorimetry of flat panel displays and quality control of pharmaceuticals. Craic Technologies Inc. (310) 573-8180 www.microspectra.com LED Task Lights DynaLume LEDLite illuminators are designed to produce electronically adjustable levels of brilliant white light for visual inspection tasks. The computer-designed, integral paralliptic reflectors and universal beam pattern provide high usable light levels. The reflectors’ average life at the highest intensity is 50,000 hours. Scientifi c Instruments (847) 679-1242 www.scientificinstruments.com Multi-Channel Flaw Detector The CTS-602 is a multi-channel flaw detector using phased array imaging technology. Its sector and linear scan is designed to meet nondestructive testing (NDT) inspection demands. It can be used in aerospace and transportation. It has up to 32 T/R channels, compatible with 16/32/64/128-element probes. Siui 86-754-88250150 www.siui.com/ndt NDT Inspection System The ONT-365 On-Trak nondestructive testing (NDT) inspection system is an overhead track light-style modular system that has ultraviolet and white light LEDs attached to a mountable platform. It is designed for use in NDT inspection booths, and for pre-inspections and screening applications requiring maximum uniformity of coverage over a large area. It has four broad-beam lamp heads, which allows inspectors to move the lamp heads anywhere along the tracks so that beam patterns can be made to fit specific needs. Spectronics Corp. (800) 274-8888 www.spectroline.com Materials Testing Machine The LS1 single-column materials testing machine performs low-force measurements for materials testing applications under 1 newton of force. Linear guide technology, preloaded ball screws and software compensation systems perform high-precision displacement measurement. Industry applications include plastics, packaging, medical devices, automotive, electronics, textiles, rubber and pharmaceuticals. It can be used for tensile and compression testing, friction, tearing, peeling, insertion or extraction and creep or relaxation. Lloyd Instruments (727) 536-6000 www.lloyd-instruments.com Shearography System The mobile ISISmobile shearography system has an integrated robot interface for an automatic test procedure. Operators receive a spatially accurate image of the part surfaces they have tested and can assign each measurement result to the surface data. This guarantees the full documentation of the test; operators can concentrate on the testing on hand and leave the traceability to the robot system and the software. The ISISmobile 3010 and ISISmobile 3100 mobile shearography systems enable testing of various composite components for nondestructive material testing. Steinbichler Optotechnik GmbH +49-8035-8704-0 www.steinbichler.de Portable Flaw Detector The USM Go is a portable flaw detector for use in the aerospace and automotive industries. It weighs 2.2 pounds and is designed for ease of prolonged operation in the harshest inspection environments. It has pressure-responsive, joystick control, ergonomic design and features data display resolution on an 800 by 480 pixel screen. The USM Go is dust- and waterproof to IP67 certification standards and proven to withstand shock and vibration. GE Inspection Technologies (866) 243-2638 www.geinspectiontechnologies.com Ultrasonic Flaw Detector The ultrasonic flaw detector rectifies in four ways: positive half-wave, negative half-wave, full wave and radio frequency. It has two scanning modes; gate alarming function; 32 detecting channels available with a separate detecting parameter and DAC curve in every channel. It has three detecting modes: single-probe, dualprobe and transmission. Time +86 10 6298 5476 www.time-ndt.com Ultrasound Camera The i600 Acoustocam provides ultrasound imaging and is a portable, handheld system for pulse-echo inspections. It has multiangle shear-wave support with throughtransmission applications. This system is configured in a variety of packages from water tanks to automated systems packaged by third party systems integrators Imperium (301) 431-2900 www.imperiuminc.com Ultrasonic Flaw Detector The Epoch 600 digital ultrasonic flaw detector is a portable instrument with conventional flaw detection capabilities. It weighs 3.72 pounds; has a video graphics array sunlight viewable display, a tunable square wave pulser, and was designed to comply with 12668-1. It has a digital high dynamic range receiver and digital filtering. Olympus (781) 419-3905 www.olympus-ims.com Mass Spectrometer The Citius LC-HRT is a mass spectrometer for the liquid chromatography-mass spectrometry (LCMS) market. It uses Leco’s folded flight path technology to provide mass spectra at more than 100 spectra per second, and resolutions of up to 100,000. The system uses electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) and desorption electrospray ionization (DESI) sources. Leco Corp. (269) 985-5496 www.leco.com
Published by QualityMagazine. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Products/683205/65366/article.html.