DIGITAL COATING THICKNESS GAGE The Elcometer 456 sets measure dry film thickness on ferrous and nonferrous metal substrates. It has a 2.4-inch color display; memory capacity up to 75,000 readings in alphanumeric batches; measurement capability to ±1% on smooth, rough, thin and curved surfaces; and measuring speed of more than 70 readings per minute. ELCOMETER (248) 650-0500 WWW.ELCOMETER456.COM WIRELESS SCANNING PROBE The I-360 2011 model is the newest iteration of both the wireless and the probe and scanning versions of the I-360, which is a 300 degree laser tracker for part measurement. It is easier to use and more comfortable to hold than previous models. It is made more identifiable by its bright red color. The updated I-360 2011 suite of product offerings has probe-only, scanner-only, probe/ scanner and wireless probe versions. AUTOMATED PRECISION INC. (800) 537-2720 WWW.APISENSOR.COM DIAGNOSTIC TOOL KIT The HPX1 Diagnostic Tool Kit is a kit that allows operators to check parameters of their HPX 1 nondestructive testing system calibration against factory specifications within minutes. It can ensure optimum performance, give objective, automated analysis, store and review previous tests, give proof of system calibration and reduce risk and guesswork. The new HPX 1 Small and irregular Plate Carrier can run small and/or irregular plates on a HPX 1 system annd accepts any shape as long as they fit within the carrier area. CARESTREAM (888) 777-2072 NDT.CARESTREAM.COM 3-D SPI PLATFORM The VP5200 in-line, 3-D solder paste inspection system uses the phase shift method to measure height. Program generation takes less than 10 minutes, and it has one-touch operation through touch panel control. It has accuracy and repeatability for height inspection within 1 ìm and volume inspection within 3%. It has horizontal resolution of 15 ìm or 25 ìm. Omron (800) 556-6766 WWW.OMRON247.COM DIGITAL FORCE GAGES The Series 3 digital force gages are designed for tension and compression force testing in quality control, manufacturing and research and design areas. They are available from 0.12 pound to 500 pounds to address applications in medical device, pharmaceutical, packaging, consumer products, automotive and aerospace industries. Accuracy is better than +/-0.3% of full scale. The force gauges have a sampling rate of 2,000 hertz and backlit graphic display. MARK-10 (631) 842-9200 WWW.MARK-10.COM SURFACE ROUGHNESS TESTER The SR100 measures roughness of large components, structures and product production. It weighs 7 ounces and has a gage range of 0.008 inch and an accuracy of 5% of reading plus 4 ìin. It has a 5-second cycle time, can switch between inch and metric mode without re-measuring and automatically shuts off after 5 minutes. THE L.S. STARRETT CO. (978) 249-3551 WWW.STARRETT.COM RE-MEASUREMENT TECHNOLOGY PolyWorks V12 has DirectReplay technology that simplifies multipiece inspection tasks performed with any point cloud digitizer or tactile probing device. The inspection project is always in-sync with the operator, and at any time, the operator can modify the inspection project and initiate the measurement of a new piece without having to edit an operation history tree. Operators may interrupt the re-measurement process and perform manual operations, then resume re-measurement. INNOVMETRIC (418) 688-2061 WWW.INNOVMETRIC.COM INSPECTION REPORT AUTOMATION TOOL InspectionXpert for Pro/Engineer extracts inspection characteristics from Pro/Engineer drawings and exports them to inspection report forms. The new release has a redesigned interface and the ability to save inspection project data for later reuse or revision. It has better control over the order and placement of inspection balloons than previous models and automates mapping of custom attributes and project properties to inspection report forms. It saves up to 97% of the time it takes to create a bubbled Pro/Engineer drawing and inspection report form. EXTENSIBLE CAD TECHNOLOGIES (800) 379-0322 WWW.EXTENSIBLECAD.COM GAGING SYSTEM The Equator gaging system is an alternative to traditional dedicated gaging. It is a high-speed comparative gaging for inspection of high-volume manufactured parts. It has been developed for the automotive, aerospace and medical sectors. It can be programmed for multiple parts and reprogrammed in minutes for design changes. It can switch between parts in seconds and allows high-speed scanning and rapid moves between features, while retaining stiffness. It has the Renishaw SP25 compact scanning probe to allow thousands of data points to be taken to define a feature for true form analysis. It can be used in wide temperature variations. RENISHAW INC. (847) 286-9953 WWW.RENISHAW.COM DATA ACQUISITION SYSTEM The DynoLAB PT data acquisition and control system integrates external devices, including dynamometers, throttle actuators, spark and fuel controllers, combustion analysis systems, emission analyzers and other input/output devices into one test system. It was designed as part of a turnkey test cell control system for engine, powertrain and component testing. SAKOR TECHNOLOGIES INC. (517) 332-7256 WWW.SAKOR.COM DIGITAL INDICATOR The most recent ìMaxìm line of digital indicators has new features including two point difference measurement; multiplier factor for ratio measurements; indicator serial number identification; resolution to 10 ìin; selectable continuous output; and longer battery life. Two point difference measurements allows comparison of different readings or calculation of measured values. The addition of multiple factors for ratio measurements allows chordal-type measurements for making inside diameter/outside diameter measurements using a V plate, or for gage fixtures using lever-type nondirect contacts. MAHR FEDERAL INC. • (401) 784-3275 • WWW.MAHRFEDERAL.COM 3-D INSPECTION SOFTWARE GOM Inspect allows operators to import scan data from various types of measuring systems with point cloud and inspection functionalities. It handles mesh processing such as polygonizeing points to meshes, smoothing, thinning, hole filling, data refinement and extracting curvature lines from meshes. It has inspection-CAD import, alignments, comparisons, CAD-based primitive generation, 2-D section analysis, geometric dimensioning and tolerance analysis, reporting and other inspection features. CAPTURE 3D • (714) 546-7278 • WWW.CAPTURE3D.COM DIFFERENTIAL MEASURING SYSTEMS The KD-5100 differential impedance position/displacement measuring systems detect the position of a conductive target relative to a pair of noncontacting sensors. Two sensors per channel give resolution to a nanometer, and measures without contacting the target. The inductive eddy current technology on which these sensors are built is unaffected by radiation and environmental contaminants. Output is differential and bipolar. KAMAN (800) 552-6267 WWW.KAMANSENSORS.COM OPTICAL SENSOR SYSTEM The SHSLab BR-110-GE-STD gives characterization of optical components and lasers in research and quality assurance. It measures curved wavefronts in real-time and with high stability. Its sensor head SHSCam BR-110-GE also can be used for partially coherent light sources such as LEDs. The sensor head delivers a lateral resolution of 58 by 43 micro lenses and is based on a camera with 12-bit gray scale. QIOPTIQ (800) 429-0257 WWW.QIOPTIQ.COM METROLOGY SOFTWARE Map DCM 3D software quantifies features of measured surfaces and characterizes surface texture. It is part of the Leica Application Suite for use with the company’s industrial microscopes. Surface topography can be viewed at any zoom level and any angle in real time. Color and intensity image overlays facilitate the location of surface features, including defects. One also can measure distances, angles and step heights. LEICA GEOSYSTEMS-METROLOGY (800) 955-5200 METROLOGY.LEICA-GEOSYSTEMS.COM PROCESS MONITOR The sigPOD 1200 series renders the monitor suitable for harsh manufacturing environments without the use of an enclosure. The sigPOD 1202 and 1204, for two- and four-channel applications, now has a 40 gigabyte Solid state drive; a 1.66 gigahertz dual-core processor and twice the memory, as well as two USB 2.0 ports. These improvements can boost overall performance by up to 10 times more than the previous version. It has independent per-channel amplifiers,Solid state drive; a 1.66 gigahertz dual-core processor and twice the memory, as well as two USB 2.0 ports. These improvements can boost overall performance by up to 10 times more than the previous version. It has independent per-channel amplifiers, SCIEMETRIC INSTRUMENTS (877) 931-9200 WWW.SCIEMETRIC.COM
Published by QualityMagazine. View All Articles.
This page can be found at http://digital.bnpmedia.com/article/Quality+Products/717285/68484/article.html.